STAINLESS STEEL SHEET
Stainless Steel Sheet for Cutting, Fabrication, and Visible Applications
Genn-Hann supplies stainless steel sheets and plates for manufacturers that need accurate dimensions, stable flatness, reliable surface quality, and customized processing support. With cold rolled and hot rolled stainless steel sheet options, Genn-Hann supports downstream applications such as sheet cutting, polishing, bending, forming, fabrication, appliance panels, kitchen equipment, machinery covers, industrial parts, and visible stainless steel components.
Our Product Grade
Quick Product Information
Cold rolled stainless steel sheets and hot rolled stainless steel plates for panels, covers, machinery parts, appliance components, fabrication, and visible stainless steel products.
Grades: 200 / 300 / 400 series stainless steel, including
304, 304L, 316, 316L, 430, 409L, 439, 201, and 202.
Standards: ASTM A240 / A480, JIS G4305, EN 10204 3.1,
EN 10028-7, and EN 10088-2 available.
Finishes: No.1, 2B, BA, No.3, No.4, No.5, HL, and SB.
Capability: 0.30–8.00 mm thickness, 50–1550 mm production width,
and 100–6000 mm customized length.
Product Introduction
Cold Rolled Stainless Steel Sheet and Hot Rolled Stainless Steel Plate
What Is Stainless Steel Sheet?
Best For Sheet Cutting and Fabrication
Which Stainless Steel Sheet Specification Should You Choose?
Choosing the right stainless steel sheet depends on the final application, thickness, width, length, steel grade, surface finish, flatness requirement, and processing method. For appliance panels, kitchen equipment, machinery covers, visible parts, and industrial fabrication, small differences in sheet grade, surface quality, and cutting tolerance can affect production efficiency and final product appearance.
Choose by Cold Rolled or Hot Rolled Sheet
Cold rolled stainless steel sheet is commonly used when the application requires better surface quality, thinner thickness, smoother appearance, and more precise dimensional control.
Hot rolled stainless steel plate is often used for thicker materials, industrial equipment, structural parts, chemical tanks, and applications where strength, heat resistance, and function are more important than decorative appearance.
Choose Stainless Steel Sheet Grades
304 / 304L Stainless Steel
A widely used stainless steel strip grade for industrial parts, appliance components, hardware, and general precision manufacturing. 304L is suitable when lower carbon content or improved weldability is required.
316 / 316L Stainless Steel Strip
Suitable for applications requiring stronger corrosion resistance, especially in chemical, marine, medical, food processing, or chloride-related environments.
430 Stainless Steel Strip
A ferritic stainless steel grade with good heat resistance, magnetic properties, and cost-performance balance. Commonly used in appliance structures, decorative parts, panels, and hardware.
201 / 202 Stainless Steel
200 series stainless steel options for applications that need a balance of appearance, formability, strength, and cost efficiency.
409L / 439 Stainless Steel
Often used for automotive, heat-related, exhaust-related, and industrial applications where forming performance and heat resistance are important.
Choose by Thickness, Width, and Length
Thickness, width, and length affect flatness, cutting yield, bending performance, fabrication quality, and final assembly.
Genn-Hann supports stainless steel sheet processing from 0.30–8.00 mm thickness, 50–1550 mm width, and 100–6000 mm customized length, depending on grade, finish, and production requirements.
For custom sheet cutting, customers should confirm required thickness, sheet width, length, tolerance, surface finish, protection method, and downstream application before ordering.
| Sheet Size | Common Name | Best Used For |
|---|---|---|
| 1000 mm × 2000 mm | 1 m × 2 m | General processing, panels, fabrication |
| 1000 mm × 2438 mm | 1 m × 8 ft | Industrial parts, appliance components |
| 1000 mm × 3048 mm | 1 m × 10 ft | Longer panels, covers, custom cutting |
| 1219 mm × 2438 mm | 4 ft × 8 ft | Standard sheet processing, machinery panels |
| 1219 mm × 3048 mm | 4 ft × 10 ft | Large covers, appliance panels, fabrication |
| 1524 mm × 2438 mm | 5 ft × 8 ft | Wide panels, architectural parts, equipment covers |
| 1524 mm × 3048 mm | 5 ft × 10 ft | Large-format sheets, industrial panels, custom projects |
Custom stainless steel sheet cutting is available based on customer requirements. Final availability may vary depending on grade, thickness, surface finish, sheet size, and production conditions.
Our Product Specifications
| Cold Rolled / Hot Rolled Stainless Steel Plate | ||||||
|---|---|---|---|---|---|---|
| Surface Finish | Steel Grade | Thickness (mm) |
Mother Coil Width (mm) |
|||
| 1219 | 1250 | 1500 | 1550 | |||
| No.1 |
304 (1.4301) 304L (1.4307) |
3.00–6.00 | * | * | * | * |
|
316 (1.4401) 316L (1.4404) |
3.00 | * | * | * | * | |
| 4.00–6.00 | * | * | * | * | ||
|
2B No.3 No.4 No.5 HL SB |
304 (1.4301) 304L (1.4307) |
0.30–0.50 | * | * | * | |
| 0.60–3.00 | * | * | * | * | ||
|
316 (1.4401) 316L (1.4404) |
0.30–0.60 | * | * | |||
| 0.70–3.00 | * | * | * | |||
| 430 (1.4016) | 0.20–3.00 | * | * | |||
|
409 (1.4512) 439 (1.4510) |
0.30–2.00 | * | * | |||
|
201 (1.4372) (Ni: 1%) 202 (1.4373) (Ni: 4%) |
0.30–2.00 | * | * | |||
| BA | 201 (1.4372) (Ni: 1%) | 0.20–1.00 | * | |||
| 304 (1.4301) | 0.25–2.00 | * | * | |||
| 430 (1.4016) | 0.25–2.00 | * | * | |||
| 439 (1.4510) | 0.30–2.00 | * | * | |||
* Available mother coil width. Final production availability should be confirmed based on steel grade, surface finish, thickness, sheet size, order quantity, and customer specifications.
Choose by Surface Finish
For Food Processing and Kitchen Equipment
Choose 2B or No.4 finish when cleanability, corrosion resistance, and a practical surface appearance are important.
For Home Appliances and Visible Panels
Choose BA, No.4, HL, or SB finish depending on whether the product requires a bright, brushed, linear, or satin appearance.
For Architecture and Interior Decoration
Choose HL, No.4, or SB finish for elevators, wall panels, facades, interior design, and premium visible surfaces.
For Chemical and Industrial Equipment
Choose No.1 or 2B finish when industrial performance, heat resistance, corrosion resistance, and function are more important than appearance.
For Precision Manufacturing
Choose the surface finish based on downstream stamping, bending, forming, polishing, coating, or assembly requirements.
cing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
faq
Need Help Choosing the Right Stainless Steel Sheet?
Stainless steel sheet is used for kitchen appliances, household products, food equipment, machinery covers, industrial panels, architectural panels, automotive components, chemical equipment, and fabricated stainless steel parts.
Stainless steel sheet usually refers to thinner flat stainless steel material, while stainless steel plate is generally thicker and used for heavier industrial or structural applications. Genn-Hann supplies both cold rolled stainless steel sheets and hot rolled stainless steel plates depending on customer requirements.
Genn-Hann supplies 200, 300, and 400 series stainless steel sheets, including 304, 304L, 316, 316L, 430, 409L, 439, 201, and 202. The right grade depends on corrosion resistance, formability, heat resistance, appearance, application environment, and cost target.
Choose 304 / 304L for general industrial, appliance, and kitchen equipment applications. Choose 316 / 316L for stronger corrosion resistance in chemical, food, marine-related, or demanding environments. Choose 430 for appliance panels and cost-efficient heat-resistant applications. Choose 409L / 439 for automotive and heat-related parts. Choose 201 / 202 for decorative, hardware, and cost-sensitive applications.
Choose 304 / 304L for general industrial, appliance, and kitchen equipment applications. Choose 316 / 316L for stronger corrosion resistance in chemical, food, marine-related, or demanding environments. Choose 430 for appliance panels and cost-efficient heat-resistant applications. Choose 409L / 439 for automotive and heat-related parts. Choose 201 / 202 for decorative, hardware, and cost-sensitive applications.
Take Action